VintageHondas.com Bulletin BoardAdd Post
 Author / Subject  Post  Date / Time 
ypsi_rambler
Valve adjustment issue
I have been having some problems with my 1972 CL175. I was doing a valve adjustment and ran into a problem on the right intake valve. The rest of them adjusted just fine when loosening the adjuster nut, but that one was stuck. When loosening nut, screw would not move freely.

If I use a little pair of needle nose pliers, I can turn the screw. However, turning the screw clockwise moves the valve arm upwards, and counter clockwise downward. It never moves adjusting screw away from valve to set gap.

Any advice?
21 Jul 2010 02:20
 Add PostTop
Change colors...Change colors...Change colors...Change colors...Change colors...Change colors...Change colors...Change colors...Change colors...Change colors...Change colors... about EasyForum! 0.015 sec
 
VintageHondas.com - 2004